I would need some help with the following:
I am using a 3550-12T switch, two Gigabit ports are connected to one server in etherchannel, load is distributed equaly between the two links! (mainly it is done by the server because 95% of the traffic is outgoing from the server). there are other 2 ports connected to a 4948 switch, configured in etherchannel. the problem is that 3550 knows only dst-mac or src-mac type of load balancing and nothing else. because the traffic is originating from one etherchannel, it is only one MAC address... the clients are connecting via WAN, so as they are routed I send all the traffic to the router, which is again one MAC address. basically none of the 2 available load balancing options works. do you know about any possible solution?