ACE: Scripted probes not working

Unanswered Question
Nov 3rd, 2007
User Badges:

I have configured an LDAP probe using the script provided. It is stuck in INIT state saying that No. Internal error: is incrementing. I have tried script LDAP_PROBE DEBUG but I don't know how to view the debug output. I have logging up and running and can see my TCP and ICMP probe activity. The LDAP server is definitely working.


Update: I have tested the FTP_PROBE too and that is also stuck in INIT state with internal errors. Can I test scripts from the command line? I know that I have the correct arguments with the script.


Please can you help, Let me know if you need more info.


Thanks.


probe : FTP_Test_Probe

type : SCRIPTED, state : ACTIVE

description :

----------------------------------------------

port : 21 address : 0.0.0.0 addr type : -

interval : 10 pass intvl : 5 pass count : 3

fail count: 3 recv timeout: 10


script filename : FTP_PROBE_SCRIPT

--------------------- probe results --------------------

probe association probed-address probes failed passed health

------------------- ---------------+----------+----------+----------+-------

rserver : FTP_Test

1.1.1.10 0 0 0 INIT


Socket state : RESET

No. Passed states : 0 No. Failed states : 0

No. Probes skipped : 0 Last status code : 30007

No. Out of Sockets : 0 No. Internal error: 297

Last disconnect err : -

Last probe time : Never

Last fail time : Never

Last active time : Never





  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
danger_mousie Tue, 11/06/2007 - 06:12
User Badges:

It seems the script did not load into memory properly. I had run the scrip file 10 LDAP_PROBE command but it was not there when i tried to find it.

Actions

This Discussion