11-04-2007 07:15 AM - edited 03-15-2019 07:02 AM
Hi Guys,
Am I missing something simple? The reception's phone will not forward to AA. If the reception is not at her desk, the AA will pickup after 4 rings.
You can call the AA from internally.
!
dial-peer voice 50 voip
description ** cue auto attendant number **
destination-pattern 501
session protocol sipv2
session target ipv4:10.1.10.2
dtmf-relay sip-notify
codec g711ulaw
no vad
!
ephone-dn 7 dual-line
number 620
pickup-group 11
label 620
description Reception
name Reception
call-forward noan 501 timeout 16
no huntstop
!
ephone-dn 8 dual-line
number 620
pickup-group 11
label 620
description Reception
name Reception
preference 1
call-forward busy 501
call-forward noan 501 timeout 1
!
ephone 4
username "reception" password 123456
mac-address 001D.A290.D177
type 7941
button 1:7 2b8
!
Thank you!
11-09-2007 07:07 AM
If no users were created in the Cisco CME interface, create a list of all users, groups, and their extensions. Also create the MWI off and MWI on ephone-dns:
11-09-2007 09:59 AM
I am sorry! It's been fixed. It was my translation messing everything up. Thank you for the reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide