11-04-2007 07:15 AM - edited 03-15-2019 07:02 AM
Hi Guys,
Am I missing something simple? The reception's phone will not forward to AA. If the reception is not at her desk, the AA will pickup after 4 rings.
You can call the AA from internally.
!
dial-peer voice 50 voip
description ** cue auto attendant number **
destination-pattern 501
session protocol sipv2
session target ipv4:10.1.10.2
dtmf-relay sip-notify
codec g711ulaw
no vad
!
ephone-dn 7 dual-line
number 620
pickup-group 11
label 620
description Reception
name Reception
call-forward noan 501 timeout 16
no huntstop
!
ephone-dn 8 dual-line
number 620
pickup-group 11
label 620
description Reception
name Reception
preference 1
call-forward busy 501
call-forward noan 501 timeout 1
!
ephone 4
username "reception" password 123456
mac-address 001D.A290.D177
type 7941
button 1:7 2b8
!
Thank you!
11-09-2007 07:07 AM
If no users were created in the Cisco CME interface, create a list of all users, groups, and their extensions. Also create the MWI off and MWI on ephone-dns:
11-09-2007 09:59 AM
I am sorry! It's been fixed. It was my translation messing everything up. Thank you for the reply.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: