I'm not seeing where to enable Alerting Name Display for CME when called from a CM phone via an H.225-GK Trunk. CME IOS verion is 12.4(5c) [CME 3.3].
The Alerting Name Display works when CME calls CM, but not when CM calls CME. I see a difference in the Call Proceeding that comes from the CME that may be the problem. I don't see a "Data" information field that is there when from CM. I tried several things to remedy, but none of these worked:
(config-dial-peer)#signaling update from ...
(conf-voi-serv)#supplementary-service h225-notify cid-update
(config-dial-peer)#progress_ind
(conf-serv-h323)#telephony-service ccm-compatible
(config)#voice call send-alert
-----------------------------
Here is the Call Progress from the CCM:
value H323_UserInformation ::=
{
h323-uu-pdu
{
h323-message-body callProceeding :
{
protocolIdentifier { 0 0 8 2250 0 2 }
destinationInfo
{
terminal
{
}
mc FALSE
undefinedNode FALSE
}
callIdentifier
{
guid 'BBE40DE18A7911DC8074F17F39C43B96'H
}
}
h245Tunneling FALSE
nonStandardControl
{
{
nonStandardIdentifier h221NonStandard :
{
t35CountryCode 181
t35Extension 0
manufacturerCode 18
}
data '80A4000400010100'H
}
}
}
}
---------------------------
//and here is the PROCEEDING FROM CME
value H323_UserInformation ::=
{
h323-uu-pdu
{
h323-message-body callProceeding :
{
protocolIdentifier { 0 0 8 2250 0 4 }
destinationInfo
{
vendor
{
vendor
{
t35CountryCode 181
t35Extension 0
manufacturerCode 18
}
}
gateway
{
protocol
{
voice :
{
supportedPrefixes
{
}
}, h323 :
{
supportedPrefixes
{
}
}
}
}
mc FALSE
undefinedNode FALSE
}
callIdentifier
{
guid '802DF5C545A9D11D0B0059010A01C8CB'H
}
multipleCalls FALSE
maintainConnection FALSE
}
h245Tunneling FALSE
}
}
