Another newbie question. I'm trying to add a site to site vpn between two pix 501's as well as the basic software access vpn to site 1. At present however I can't get the 2nd site to connect. This may be because they both go through separate routers to get to the internet. Although I'm not sure this makes a difference as they map straight through the external routers.
My set-up is like this:
pix 1: internal network 192.168.10.x
between pix and router 192.168.111.x
external ip: 188.8.131.52
to which I can connect software vpn clients no problem.
pix 2: internal ip: 192.168.20.x
between pix and router 192.168.120.x
external ip: 184.108.40.206
I've attached the results from the show crypto map command and the show ipsec command from pix 2.
I've attached the config from pix2 as well, which mirrors the info at pix 1 apart from the ip's being different.
any help would be appreciated