IPIVR upgrade from 3.1.3 to 4.0.4

Unanswered Question
Nov 5th, 2007
User Badges:

Hi All;

Can any one direct me if there is a CD Media to do upgrade from IPIVR 3.1.3 to IPIVR 4.0.4 directly? I looked in the documents and did not find, I found about hardware and software compatibility but did not find about the upgrade possibilities.

Any Help :) -



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Edward Umansky Tue, 11/06/2007 - 13:28
User Badges:
  • Silver, 250 points or more

The IPIVR 4.0.4 install media is also used for upgrades. The instructions are located in this doc chapter 7: http://www.cisco.com/application/pdf/en/us/guest/products/ps6488/c1097/ccmigration_09186a00806690b2.pdf

FYI there are a lot of issues with upgrades from 3x to 4.0.4. I would highly recommend going to 4.0.5 as the upgrade process was reworked in this version to deal with these issues. If you must go to 4.0.4, I would recommend rebuilding the OS from scratch after the uninstall step of the upgrade is complete, then performing a restore with the backed up data (this is how the upgrade is handled in 4.0.5, see the 4.0.5 install doc for details).


This Discussion