[policy map on POS interface (GSR)]

Carlos A. Silva · ‎11-05-2007

hi,

i tried applying the following configuracion on a POS interface in a GSR:

class-map match-any Internet_All

match access-group 21

!

access-list 21 permit any

!

policy-map Internet_Mark_In

class Internet_All

set ip dscp 0

but i got the follwing:

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int pos1/1

Router(config-if)#servi input Internet_Mark_In

%Classmap 'Internet_All' not supported on interface POS1/1

Router(config-if)#

anybody know why this can happen?

please advice!

thanks in advance,

c.

htarra · ‎11-12-2007

If you do not have policing configured in the policy-map that is applied on the POS interface then the only counters you would see are for the default class as we can see it's the case from the outputs you attached. Also try this command sh int pos [/] | i (output queue)