site to site vpn with Dr site access

Unanswered Question
Nov 5th, 2007

site M (


LAN( B #--------# (DR site) Site C LAN static nat

End point ips of sites M : site B site C :

Site B and site C does not need to talk to each other

Site C and M will have a tunnel will work only in case site b goes down

MY site M is will have a site to site vpn conenction to site B .

In case site B goes down , site M should conenct to Site C ( which has a static nat to site B's lan ip)

How can I configure the above setup ?

How will site M detect that Site B is down and communicate with Site C automatically.

Could some one give an sample config for this vpn configuration on site M,site B and Site C

Site M and Site B has no nat statements .

Thanks in advance


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rajbhatt Sun, 11/11/2007 - 22:39


Any one has any leads on this.

We do have a cisco website with hub and spoke access but that does not work as a DR site



This Discussion