11-06-2007 06:08 AM
Hi
let us assume that i have a PE Router in the MPLS IBGP Could and i whant to see which route-targets are used by all the vrf's are configured on the other PE's in the Could.
How can i see all the used route-targets on the router.
regards
Markus
11-06-2007 02:15 PM
Hi Markus,
I am afraid there is no possibility to see all used RTs from other PEs. A PE router will only keep those VPNv4 prefixes, where at least one RT matches an import statement. All other prefixes are silently discarded for scalability reasons. Only a VPNv4 route reflector would keep all VPNv4 prefixes received by any PE. But even then there is no command listing all RTs present in the VPNv4 BGP table.
So the only way of getting all used RTs is to collect all PE configs and extract the RTs. In other words: make sure you document the RTs in use upfront (f.e. with ISC/ANA).
Hope this helps! Please rate all posts.
Regards, Martin
11-07-2007 03:40 AM
if you cwant to collect the used rt in this case you can create the router and match the asnumber (ASN:XX).
may be it will work.
regards
shivlu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide