Disabling the web interface

Answered Question
Nov 6th, 2007
User Badges:

Is it possible to disable the web interface on the MDS switches? If so do you know the commands?


Cheers


Richard

Correct Answer by andyhp1 about 9 years 7 months ago

You can use ACLs. The Cisco cook book has details. The commands will be something like,

mds-11-03# config t

Enter configuration commands, one per line. End with CNTL/Z.

mds-11-03(config)# ip access-list nohttp deny tcp any any eq port 80

mds-11-03(config)# ip access-list nohttp deny tcp any any eq port 443

mds-11-03(config)# ip access-list nohttp permit ip any any

mds-11-03(config)# interface mgmt0

mds-11-03(config-if)# ip access-group nohttp in

mds-11-03(config-if)# end

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
colin.mcnamara Tue, 11/06/2007 - 20:40
User Badges:
  • Bronze, 100 points or more

You should be able to apply an access list filtering this traffic to the mgmt interface.

Correct Answer
andyhp1 Fri, 11/09/2007 - 01:59
User Badges:

You can use ACLs. The Cisco cook book has details. The commands will be something like,

mds-11-03# config t

Enter configuration commands, one per line. End with CNTL/Z.

mds-11-03(config)# ip access-list nohttp deny tcp any any eq port 80

mds-11-03(config)# ip access-list nohttp deny tcp any any eq port 443

mds-11-03(config)# ip access-list nohttp permit ip any any

mds-11-03(config)# interface mgmt0

mds-11-03(config-if)# ip access-group nohttp in

mds-11-03(config-if)# end

Actions

This Discussion

 

 

Trending Topics: Storage Networking