Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
351
Views
0
Helpful
3
Replies

Route problem

moses12315
Level 1
Level 1

‎11-06-2007 07:47 AM - edited ‎03-03-2019 05:41 AM

I have a Router A and a Router B directly connected. On both Routers eigrp (distance 170) and Rip(AD 120) are running. On Router B the ip address of eo is 10.10.1.2/24 and a computer is connectes with ip 10.10.1.11/24. From Router A i can ping the 10.10.1.2/24 but not the 10.10.1.11/24 which is the PC. The strange thing even from Router B i can not ping the 10.10.1.11/24.

All routes are advertise by poth protocols as

router rip

network 10.0.0.0

router eigrp 1

distance 170 0.0.0.0 255.255.255.255

network 0.0.0.0

What might be the problem?

Thanks

moses

Labels:
0 Helpful
3 Replies 3

Jon Marshall
Hall of Fame
Hall of Fame

‎11-06-2007 07:54 AM

Hi

Check

1) Do you have a personal firewall on your PC.

Also just for completeness make sure you have default-gateway on PC set to 10.10.1.2 and the correct subnet mask of 255.255.255.0.

HTH

Jon

0 Helpful

moses12315
Level 1
Level 1
In response to Jon Marshall

‎11-06-2007 08:22 AM

Yes jon i checked everything those. They are ok.

0 Helpful

bmbreer
Level 1
Level 1

‎11-06-2007 09:42 AM

post the configurations for both routers

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents