cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
787
Views
0
Helpful
1
Replies

Getting Traceback error in logs on 7204VXR

d.worthley
Level 1
Level 1

I have a pair of Cisco 7204VXR (NPE400) running Version 12.4(12a). Getting this message in logs:

FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walker (0.0.0.1/0). -Traceback= 0x6074A528 0x60605924 0x60CA1A9C 0x60CA207C 0x6102AE6C 0x6102ED9C 0x6101FCD4 0x61048644 0x60847620 0x60847604

Looks to be related to SNMP. Should I be concerned?

1 Reply 1

Richard Burts
Hall of Fame
Hall of Fame

Dan

A traceback is a sign of a software error. If you have an ID on the Cisco web site with the right privileges you might try putting that through the output interpreter or the error decoder and see what they indicate.

A software error is never good. But many of them are not very bad and some are just cosmetic. If you are not experiencing problems then I would not be overly concerned about the traceback.

HTH

Rick

HTH

Rick
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco