a lot of input errors, 0 output , help me

dahua.huang · ‎11-06-2007

Hi, all

4506 L3 port G5/25-26, there are lot of input errors, 0 output

these two ports are set channel to 3560, 3560 ports are ok, no any errors.

I checked the duplex and speed, all of ports are auto (4506 and 3560)

**********************************

104653383616 packets input, 116665685136161 bytes, 0 no buffer

Received 483639942 broadcasts (455841929 multicast)

0 runts, 0 giants, 0 throttles

15065457 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 input packets with dribble condition detected

48228810084 packets output, 9429961238952 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

*****************************************

4506 version: 12.2(25)SG

3560 version: 12.2(25r)SE1

any ideals, Thanks

greg.day · ‎11-07-2007

Drop one port out of the channel and see if the errors persist. If so, add it back and drop the other. Errors like this tend to be cable/fiber related, so eliminate that first.

MZydorczyk2 · ‎11-08-2007

I am also having problem with this. Ours is not on a layer 3 port however. It's a port on our 4506 which is connected directly to a computer.