Replace T1ATM IMA circuits with DS3

Unanswered Question
Nov 7th, 2007
User Badges:

I currently have two sites. one site has two 3662 routers. The other site has one 3662 router and one 7507 router. There are currently several T1 ATM circuits in 2 IMA bundles. The plan is to switch the ATM IMA circuits out and use two DS3 circuits between the sites. If I use the NM-1T3/E3 network module for the 3662 routers is the correct adapter in the 7507 the PA-T3+ Port adapter and then provision regular DS3 transport (not DS3 ATM transport) ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Wed, 11/07/2007 - 13:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes, correct.

Hope this helps, please rate post if it does!


This Discussion