11-07-2007 01:40 PM - edited 03-03-2019 07:26 PM
Where can I find an example of HSRP config to link 2 2821 routers?
11-07-2007 01:46 PM
Hi
Assume fa0/0 on both 2821 routers.
HSRP address 192.168.5.1
Router 1 = 192.168.5.2
Router 2 = 192.168.5.3
Router 1
interface fa0/0
ip address 192.168.5.2
standby 1 ip 192.168.5.1
standby 1 authentication "cisco"
standby 1 priority 110
standby 1 preempt
Router 2
interface fa0/0
ip address 192.168.5.3
standby 1 ip 192.168.5.1
standby 1 authentication "cisco"
standby 1 priority 100
standby 1 preempt
HTH
Jon
11-07-2007 01:53 PM
This is an example, two routers with two switches, as long you have a trunk between
switches failover should work.
ROUTER_1
interface FastEthernet0/1
description Connection to SWITCH_1_port_24
ip address 1.1.1.2 255.255.255.0
speed 100
full-duplex
standby 1 ip 1.1.1.1
standby 1 preempt
ROUTER_2
interface FastEthernet0/1
description Connection to SWITCH_2_PORT_24
ip address 1.1.1.3 255.255.255.0
speed 100
full-duplex
standby 1 ip 1.1.1.1
standby 1 priority 90
standby 1 preempt
HTH
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide