cant browse or work with network behind vpn

Unanswered Question
Nov 7th, 2007
User Badges:

I have Pix 525 as easy vpn server and pix 501 as hardware vpn client (

nem), I can succesifully establish vpn connection, but i can't browse or ping network on inside interface of pix 525

in atachments you can find my conf

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
ajagadee Thu, 11/08/2007 - 06:37
User Badges:
  • Cisco Employee,

The MVDPOOL defined for the VPN Client has a range of and I dont see a NAT 0 Statement to by pass NAT. Also, did you want to configure has the MVDPOOL, because your configurations are more tailored to allow everything to work when the VPN Clients get an ip address assigned from the range.

Let me know how the test goes after making the changes to POOL or NAT 0 command.



knamikhazehaqq Fri, 11/09/2007 - 04:46
User Badges:

Thanks for reply ajaqadee

It's my first time when I'm doing vpn, I didn't understand everything

but I made new configuration, after vpn connection established I can ping from server site pc behind the remote hardware vpn client but from remote site i can't ping inside network of easy vpn server:(

in atachment You can find both configurations

pls write exactly what i have to do, with commands, what to add or what to change


This Discussion