voip migration, where to start ?

Unanswered Question
Nov 8th, 2007
User Badges:

Hi,

Im new with voip systems,

On specialist recommandations, i just bought :


cisco2811-ccme/k9

nm-cue

vic2-4fxo (2)


I need your advices!!

What is the best way to start installing the system ?

Actually we have an analogic syst. with 4 pstn lines.


i didn't find complete documentations.


Thanks a lot for those who will answer.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Rob Huffman Thu, 11/08/2007 - 13:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Xavier,


This is a tough (but fair) question. Seeing that you have CME and CUE, here are some really good "getting started" configuration type docs;


Cisco CallManager Express/Cisco Unity Express Configuration Example


http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml


Cisco CallManager Express 3.0 and Later Integration with Cisco Unity Express


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a008059fb5f.html


Cisco Unified CallManager Express Solution Reference Network Design Guide


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_implementation_design_guide_book09186a00805f05db.html


Hope this helps! Have a look at these for your initial ideas :)

Rob


Actions

This Discussion