can WLC4406/2106 tell which WAPs are adjacent/near/neighbors to other WAPs?

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Richard Atkin Wed, 11/21/2007 - 13:18

You can certainly view this information, yes.

Via the controller GUI...

(doing this from memory so exact wording might be off a bit!)

1. Click the Monitor tab (top left)

2. Click Access Points (or similar; left hand column)

3. Click on an Access Point

4. Scroll down to the bottom of the screen, you should see the AP RF Neighbours, and also RX Strength.


This Discussion