11-08-2007 03:32 PM - edited 03-15-2019 07:08 AM
Hi Experts,
I been receiving this alert:
Alert: Transmit % Utilization of "Call Manager"-MC TCP Loopback interface is 100%
What could this mean?How to troubleshoot it? where to look?
thanks for any help!
11-11-2007 12:15 AM
Which server model and CallManager version?
From where you are getting this alarm? RTMT ?
Any high CPU?
NIC settings?
Switch port config?
11-11-2007 04:39 PM
Which server model and CallManager version?
--MCS-7800 series Intel Xeo, CPU 3.40Ghz, 2gb memory, Win 2K sp4, CCM 4.1(3)sr3a
From where you are getting this alarm? RTMT ?
--Im getting it from Solarwinds (Network performance monitoring)
Any high CPU?
--none, according to RTMT
NIC settings?
--Lan1, Lan 2, & ILO ports enabled, static ip
Switch port config?
--
interface GigabitEthernet1/10
description ### PUB Server ###
no ip address
speed 1000
duplex full
mls qos trust cos
switchport
switchport access vlan #
switchport mode access
spanning-tree portfast
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide