Bandwidth Allocation - Router

Unanswered Question
Nov 9th, 2007
User Badges:

I need help on Bandwidth distribution.


I have 2MB link from ISP terminated on my 3640 Router.


On the Router I have natted public to private IP address for 3Servers.


I want to give Server01 1Mbps

Server02 = 512Kbps

Server03 = 512Kbps


Plz help with the reqd config


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bvsnarayana03 Fri, 11/09/2007 - 07:23
User Badges:
  • Silver, 250 points or more

You can define a policy-map & within that configure policing for each server as per the requirement.


Lets say server1 is 10.1.1.1.


Create access-list to match the traffic for server.

ip access-list extended server1

permit host 10.1.1.1 any


Create class-map to associate this acl:

class-map server01

match access-group server1


Now cretae a policy map:

policy-map servers

class server01

police 100000


Similarly create it for other server.


now apply the policy to interface with command:

ip service-policy output servers



Happy Diwali.

Amin Shaikh Fri, 11/09/2007 - 07:44
User Badges:

Happy Diwali to you.....

Thanks for your reply....


Can you help me in config for another Server

assuming server is 2.2.2.2 and bandwidth reqd is 512Kbps



Is it possible as well to provide a cisco-link with similar config...

Amin Shaikh Fri, 11/09/2007 - 21:42
User Badges:

Thanks.


Need config help for server02 where bandwidth reqd is 512Kbps.



bvsnarayana03 Sat, 11/10/2007 - 10:25
User Badges:
  • Silver, 250 points or more

Lets say server2 is 10.1.1.2


Create access-list to match the traffic for server.

ip access-list extended server2

permit host 10.1.1.2 any


Create class-map to associate this acl:

class-map server02

match access-group server2


Now create a policy map:

policy-map servers

class server01

police 100000

class server02

police 512000


Apply this on interface:

service-policy output servers

Actions

This Discussion