11-09-2007 06:42 AM - edited 03-03-2019 07:28 PM
I need help on Bandwidth distribution.
I have 2MB link from ISP terminated on my 3640 Router.
On the Router I have natted public to private IP address for 3Servers.
I want to give Server01 1Mbps
Server02 = 512Kbps
Server03 = 512Kbps
Plz help with the reqd config
11-09-2007 07:23 AM
You can define a policy-map & within that configure policing for each server as per the requirement.
Lets say server1 is 10.1.1.1.
Create access-list to match the traffic for server.
ip access-list extended server1
permit host 10.1.1.1 any
Create class-map to associate this acl:
class-map server01
match access-group server1
Now cretae a policy map:
policy-map servers
class server01
police 100000
Similarly create it for other server.
now apply the policy to interface with command:
ip service-policy output servers
Happy Diwali.
11-09-2007 07:44 AM
Happy Diwali to you.....
Thanks for your reply....
Can you help me in config for another Server
assuming server is 2.2.2.2 and bandwidth reqd is 512Kbps
Is it possible as well to provide a cisco-link with similar config...
11-09-2007 09:30 AM
11-09-2007 09:42 PM
Thanks.
Need config help for server02 where bandwidth reqd is 512Kbps.
11-10-2007 10:25 AM
Lets say server2 is 10.1.1.2
Create access-list to match the traffic for server.
ip access-list extended server2
permit host 10.1.1.2 any
Create class-map to associate this acl:
class-map server02
match access-group server2
Now create a policy map:
policy-map servers
class server01
police 100000
class server02
police 512000
Apply this on interface:
service-policy output servers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide