VLAN, DMZ and Cisco 871-SEC-K9

Unanswered Question
Nov 9th, 2007

Recently I bought Cisco 871 Advanced Security router. In table on the product site http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html is info that the router with this IOS image gives support for two VLANs from which one is dedicated to DMZ. I was trying to build this DMZ with SDM but without any success. Also I tried to enter the VLAN to database manually via console but I got only

Vlan can not be added. Maximum number of 1 vlan(s) in the database.

Is there any way to add the second VLAN as it should be possible?

I have this problem too.
1 vote
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
wdrootz Thu, 11/15/2007 - 10:53

Under one SSID, only one VLAN can be configured. You need to go for 2 SSIDs.

Router(config)# interface dot11radio 0

Router(config-if)# ssid cisco

Router(config-if-ssid)# vlan 1

Router(config-if-ssid)# authentication open

Router(config-if)# ssid test

Router(config-if-ssid)# vlan 2

Router(config-if-ssid)# authentication network-eap eap_methods

w_zamiar_ Thu, 11/15/2007 - 12:18

Ok, I know it. But this isn't wireless router :) It's version without WiFi. But thanks for the message


This Discussion