MGCP T38 - CUCM6

Unanswered Question
Nov 9th, 2007
User Badges:
  • Silver, 250 points or more


Has anyone gotten this to work successfully?


I am using RightFax with SR140. The call goes out the PSTN and connects to the far end fax, but cannot negotiate the proper RTP.


I have verified all codec, relay, etc. MGCP T38 is supposed to be supported with CUCM6.


Any ideas would be great.


Thank you,

Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gogasca Sun, 11/11/2007 - 00:03
User Badges:
  • Green, 3000 points or more

Hi Jon,

Yes...we do support T.38 and CCM 6.0

What is your current setup?


Sr140 -- H323 -- CCM -- MGCP ?

In 4.2(3) and 6.0 afaik when CCM downloads the config to the MGCP, it no longer includes the T.38 FAX inhibit command....which is a problem if you don't have a gateway IOS version that supports it:

12.4(7.12) / 12.4(7.14)T or later.


To be honest I have only tested in 4.2(3) but should be the same logic.


Actions

This Discussion