AIR-AP1230B-A-K9 and WS-C3524-PWR-XL

Unanswered Question
Nov 9th, 2007
User Badges:

Hello, i'm setting up some new ap's, connected to some 3750 access switches and 3524 access switches.


Everything seems to be okay except teh ap's connected to the ws-c3524 switch. Is there not enough sufficient poe to run these ap's on this switch? Its hard to find information as this switch model is eol.


WARNING:

All radios disabled due to insufficient inline power. Upgrade inline power source or install power injector......

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Fri, 11/09/2007 - 12:07
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Luke,


Sorry to say the AP 1240 Series can only be powered by 802.3af power capable switches :( The older 3524 will only supply Cisco pre-standard power. Here is some background info.


PoE IEE 802.3af White Paper


http://www.cisco.com/en/US/netsol/ns340/ns394/ns147/ns412/networking_solutions_white_paper09186a008026641c.shtml


Hope this helps!

Rob

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode