cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
427
Views
5
Helpful
5
Replies

Inter-Cluster Trunk

i have two cluster and i am doing (Non-Gatekeeper Controlled) ICT. but it's not working.

i do setting like :

Product:Inter-Cluster Trunk (Non-Gatekeeper Controlled)

Device Name:my sever name

Tunneled Protocol:none

Inbound Calls

Significant Digits: All

Outbound Calls

Calling Party Selection:originator

Remote Cisco Unified CallManager Information

Server 1 IP Address/Host Name:my other cluster ip add

but i can't call one cluster to other cluster...???

5 Replies 5

Zin.Karzazi
Level 5
Level 5

Hi,

First you need to set up a route pattern to your remote site. Let s say your DNs are 7xxx and your remote site is using 6xxx.

set up a route pattern 6xxx and select the trunk Route List in it.

1- Include the Partition of your Route pattern (6xxx) in the CSS of your phones.

2- See if there is any pre dot or anything related in your Route pattern

3- Ensure that the route list on your RP is correct (ie Trunk Route List)

4- on your remote trunk-> Inbound call -> CSS

check if this css include the Partition of your phones.

if all this doesnt help. use Dialed Number Analyzer (https://ip/dna) select trunk and see what the results are. Activate Traces on both callmanager (SDI, SDL). Use a sniffer on your phone and see if he is sending packets to your remote CCM.

HTH

Zin Elabidine Karzazi

Hi Zin,

Very nice answer! 5 points for your good work.

Take care,

Rob

Hi,

I have one doublt on ICT.

In my network I'm going to create one ICT between CCM4.x cluster & CCM6.x cluster. Is it work or not. since i have doubt that ICT will work between same version of CCM cluster. Please correct me..

Regards

Naga.

Hi Naga

I have tested the ICT between CM4 and CM5 and between CM4 and CM6, it should work without any issues

Thanks

Kumaran

Hi Kumaran,

Thanks for your reply. Once I test i will give the feedback

Naga

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: