×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

PIX 6.2 to 7.1 conversion

Answered Question
Nov 11th, 2007
User Badges:

Hi all, well I'm new to the PIX world so if anyone can help, here goes.

Is there a tool that converts PIX 6.x ios configs to 7.1. I'm going from a PIX 506 to a 525.

Correct Answer by srue about 9 years 9 months ago

if you're using conduits, you can convert them to ACL's using the OCC tool available here:

http://www.cisco.com/cgi-bin/tablebuild.pl/pix


other than that, there's no tool for what you need. most of the commmands will be the same though. It will be easier if you first upgrade the 506 to 6.3(5) though.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
srue Sun, 11/11/2007 - 02:36
User Badges:
  • Blue, 1500 points or more

if you're using conduits, you can convert them to ACL's using the OCC tool available here:

http://www.cisco.com/cgi-bin/tablebuild.pl/pix


other than that, there's no tool for what you need. most of the commmands will be the same though. It will be easier if you first upgrade the 506 to 6.3(5) though.

Actions

This Discussion