11-11-2007 01:05 AM - edited 02-21-2020 01:47 AM
Hi all, well I'm new to the PIX world so if anyone can help, here goes.
Is there a tool that converts PIX 6.x ios configs to 7.1. I'm going from a PIX 506 to a 525.
Solved! Go to Solution.
11-11-2007 02:36 AM
if you're using conduits, you can convert them to ACL's using the OCC tool available here:
http://www.cisco.com/cgi-bin/tablebuild.pl/pix
other than that, there's no tool for what you need. most of the commmands will be the same though. It will be easier if you first upgrade the 506 to 6.3(5) though.
11-11-2007 02:36 AM
if you're using conduits, you can convert them to ACL's using the OCC tool available here:
http://www.cisco.com/cgi-bin/tablebuild.pl/pix
other than that, there's no tool for what you need. most of the commmands will be the same though. It will be easier if you first upgrade the 506 to 6.3(5) though.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: