RAS config

Unanswered Question
Nov 11th, 2007

Hi!

I want to configure my 3725 router to become dialin access server using analog modem. Your help will be much appreciated.

Tnx!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
guruprasadr Tue, 11/20/2007 - 05:05

HI, [Pls RATE if HELPS]

Here is the Sample Configuration of RAS Router:

!

service nagle

service timestamps debug datetime msec localtime

service timestamps log datetime msec localtime

service password-encryption

service linenumber

!

hostname <--->

!

logging buffered 10000 debugging

aaa new-model

aaa authentication login default tacacs+ line

aaa authentication ppp default if-needed tacacs+

aaa authorization network default tacacs+ if-authenticated

aaa accounting exec default start-stop tacacs+

aaa accounting network default start-stop tacacs+

aaa accounting connection default start-stop tacacs+

aaa accounting system default start-stop tacacs+

enable secret 5 <---->

enable password 7 <---->

!

ip subnet-zero

ip rcmd rcp-enable

ip rcmd rsh-enable

ip rcmd remote-host xyz nobody

ip rcmd remote-host xyz ovadmin enable

ip domain-list <---->

ip name-server <------>

ip accounting-threshold 4096

vpdn enable

vpdn search-order domain dnis

async-bootp dns-server

clock timezone MET 1

!

!

interface Loopback0

description *L0* ***********

ip address

no ip directed-broadcast

!

interface Ethernet0

description *connected to LAN*

ip address

ip access-group # in

ip access-group # out

no ip redirects

no ip directed-broadcast

ip route-cache same-interface

ip route-cache policy

no ip mroute-cache

!

interface Group-Async1

description **-----**

ip unnumbered Loopback0

ip access-group # in

no ip directed-broadcast

encapsulation ppp

ip route-cache policy

ip tcp header-compression passive

no ip mroute-cache

async dynamic address

async mode interactive

peer default ip address pool ras-pool

no cdp enable

ppp authentication pap chap callin

group-range 1 8

!

ip local pool ras-pool

ip classless

ip route 0.0.0.0 0.0.0.0

!

logging trap debugging

logging

>> ACL Configuration<<

tacacs-server host key test

tacacs-server host key test

tacacs-server attempts 2

tacacs-server timeout 10

!

snmp-server community

>>SNMP Configuration

!

line con 0

password 7

transport input none

line 1 4

location <---->

autoselect during-login

autoselect ppp

modem InOut

modem autoconfigure type usr_courier

rotary 1

transport preferred none

transport input all

stopbits 1

speed 1200

flowcontrol hardware

line 5 7

location <--->

autoselect during-login

autoselect ppp

modem InOut

rotary 1

transport preferred none

transport input all

stopbits 1

speed 57600

flowcontrol hardware

line 8

location <----->

autoselect during-login

autoselect ppp

modem InOut

modem autoconfigure type usr_courier

rotary 1

transport preferred none

transport input all

stopbits 1

speed 115200

flowcontrol hardware

line aux 0

password 7

transport input all

line vty 0 4

password 7

transport preferred none

!

ntp

>>NTP Configuration

end

HOPE THIS HELPS.

PLS RATE IF HELPS

Best Regards,

Guru Prasad R

Actions

This Discussion