Linksys switch on smartports WS-CE500-24LC

copsahl1974 · ‎11-12-2007

We are having alot of trouble when it comes to connecting switches to smartports on the E500.

Scenario: I have several machines in my office, so i set up an linksysswitch and connect it to the network. Setting up my port on the E500 to be a switch, connect my computers and all get ip. But here it stops, only one get beyond the E500 and out on the internet. Any idea`s? If you guys need more info, let me know.

E500 is running 12.2(25)SEG

Regards

Christian

lgijssel · ‎11-12-2007

Likely portsecurity is active on the E500.

This allows only one adress to pass through.

Change the smartport role to allow more:

http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml#sportroles

regards,

Leo

copsahl1974 · ‎11-12-2007

Thanks for fast respons,

The problem is that i have not yet manage to find a way to configure the portsecurity settings for the smartports on this switch.

Regards

Christian