11-12-2007 04:19 AM - edited 02-21-2020 01:47 AM
dear guys help in pix 525 configuration
i have pix525 with active /standby license what i have to do
and right now i cant ping from my inside of pixfirewall to dmzzone
i cant understand
i appliend nat ,global,acces-list still its not pinging
my secanrion is internet router -pix525-inside and my dmz sever
right now we are having 14 server in dmz
each server is having 2 lan cards
one lan card is going to dmz and other lan card is going to inside directly without pix
ie from outside its dmz
but from inside its inside
and we are having isa server in dmz zone
does that is stooping ping from inside to dmz
plz
solve any body
i can give the running config and secnario
11-16-2007 10:20 AM
Try and ping from the inside to outside and to the dmz's. You should do a "clear xlate" command after every change you make.(very important).Refer to the PIX Firewall documentation at the following site:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/index.htm
11-28-2007 06:17 AM
Hi shadaabahmed
Could you provide the running config ?
Moreover, when you said "other lan card is going to inside directly without pix " , you mean to say few inside host has direct access to the DMZ server ? Is this the way ?
Thanks
Rajesh Hariharan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide