7940 Sip Call Manager 5.1

Unanswered Question
Nov 12th, 2007

I am wondering if I can decrease the interdigit time out for a 7940 running SIP in call manager 5.1. Right now after I press the last digit it takes around 10 seconds before the number dials. My second question is with a 7940 running SIP is there anyway to just dial a number without selecting the line first? right now I have to select a line go offhook first prior to being able to dial.

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bwilmoth Fri, 11/16/2007 - 10:31

If the user dials digits but then does not press the Dial softkey or the # key, the phone will wait for inter-digit timeout (10 seconds by default) before sending a SIP INVITE message to Cisco Unified CallManager.The inter-digit timer is not configurable as such. However it can be controlled via the dialplan. If you don't have a dial plan specified for the phone simply create one with the following rule. The timeout is your new inter-digit timer.

Actions

This Discussion