×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

gateway management via CCM

Answered Question
Nov 13th, 2007
User Badges:

Let me rephraze my purpose from the previous post:


Can CallManager control remote gateway and send to them outbound call to the PSTN and all inbound calls from the PSTN pass through the desired gateway or it's th CM who manager them.


Correct Answer by AJAZ NAWAZ about 9 years 9 months ago

All the calls will be routed from Callmanager to the gateway. The first point of call is Callmanger. Next to the gateway and from there PSTN. So Callmanager is managing how the call should be routed.


For third party billing check out:


http://www.tigercomms.com/english/


hth

Ajaz


pls rate the post if it helps.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
AJAZ NAWAZ Tue, 11/13/2007 - 06:08
User Badges:
  • Silver, 250 points or more

All the calls will be routed from Callmanager to the gateway. The first point of call is Callmanger. Next to the gateway and from there PSTN. So Callmanager is managing how the call should be routed.


For third party billing check out:


http://www.tigercomms.com/english/


hth

Ajaz


pls rate the post if it helps.

Seifeddine-Tlili Tue, 11/13/2007 - 06:15
User Badges:

thanks for your help so i understood that Cisco doesn't provide a billing solution and by the way can you please provide somes links shown some configurations on how the call should be routed by the CallManager

Actions

This Discussion