cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
284
Views
0
Helpful
3
Replies

gateway management via CCM

Let me rephraze my purpose from the previous post:

Can CallManager control remote gateway and send to them outbound call to the PSTN and all inbound calls from the PSTN pass through the desired gateway or it's th CM who manager them.

1 Accepted Solution

Accepted Solutions

AJAZ NAWAZ
Level 5
Level 5

All the calls will be routed from Callmanager to the gateway. The first point of call is Callmanger. Next to the gateway and from there PSTN. So Callmanager is managing how the call should be routed.

For third party billing check out:

http://www.tigercomms.com/english/

hth

Ajaz

pls rate the post if it helps.

View solution in original post

3 Replies 3

AJAZ NAWAZ
Level 5
Level 5

All the calls will be routed from Callmanager to the gateway. The first point of call is Callmanger. Next to the gateway and from there PSTN. So Callmanager is managing how the call should be routed.

For third party billing check out:

http://www.tigercomms.com/english/

hth

Ajaz

pls rate the post if it helps.

thanks for your help so i understood that Cisco doesn't provide a billing solution and by the way can you please provide somes links shown some configurations on how the call should be routed by the CallManager

Hi SEIFEDDINE

Pls see the following link. I recommend it strongly to you:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f54af.shtml

Calls are routed to the gateway using route patterns / route lists / route groups.

Best regards

Ajaz

pls rate this post if it helps

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: