AP1220 not broadcasting networks

Unanswered Question
Nov 13th, 2007
User Badges:


I have an AP1220 configured connected to trunk port on a 2980 switch. On the AP i have it setup like this on the Dot1Radio0 Interface:

interface Dot11Radio0

no ip address

no ip route-cache


ssid Internal

vlan 7

authentication open



But the SSID is not getting broadcasted out. I have the same setup on another AP in another office and its working fine. Any ideas why it is not broadcasting my network? could it be faulty?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gmarogi Mon, 11/19/2007 - 11:29
User Badges:
  • Bronze, 100 points or more

go into the AP GUI and enable Broadcast SSID checkbox in the corresponding page and click Apply. Restart and see if the problem still persists.


This Discussion