11-13-2007 11:25 AM - edited 07-03-2021 02:56 PM
Hi, We are in the process of deploying Cisco IP Communicator 2.1.1.0 but we are having voice quality issues when use IP COmmunicator over the wireless...We want to know if the AP 1200 series can be configured for QoS or the configuration has to be done only the switch port level..Thanks in advance..Our laptops are 802.1p enabled. Raj.
Solved! Go to Solution.
11-19-2007 11:46 AM
Yes, You have the option to configure QoS on Access point 1200 for the traffic between the wireless clients and the access points. For guidelines refer to URL
http://cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37qos.html
11-19-2007 11:46 AM
Yes, You have the option to configure QoS on Access point 1200 for the traffic between the wireless clients and the access points. For guidelines refer to URL
http://cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37qos.html
11-22-2007 09:10 AM
thanks...The document says APs supports only downstream(switch to AP) and not upstream Laptop to AP..we are looking for end - to - end QoS solution meaning all the voice packets are marked by the softphone with higher priority and when the access point receives the packets we want the voice packets prioritised and send ..can this be done...thanks,Raj.
11-27-2007 01:11 PM
depends if you're using vlans on the ap or not (if yes configure qos on the ap, if no configure them on the switch.
the following is a useful resource on wireless qos...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: