11-14-2007 12:31 AM
Dear All,
Kindly let me know on what basis does policing is done on ME3400 & C3550.
1. L2 Ethernet Frame ( including Preamble, SFD & FCS)
2. L2 Ethernet Frame inlucding Preamble, SFD
3. L2 Ethernet Frame excluding Preamble, SFD
4. L2 Ethernet Frame excluding Preamble, SFD & FCS
5. On L3 packet.
11-20-2007 07:10 AM
In order to set up policing, you must define the QoS policy maps and apply them to ports. This is otherwise known as port-based QoS.
Refer to this document for more information on policing:
http://cisco.com/en/US/products/hw/switches/ps646/products_tech_note09186a00800feff5.shtml
11-20-2007 10:58 PM
looking forward for the method on which bandwidth stated in the policing command is computated.
e.g after enable qos on box & creating proper class-map & policing on an interfacef0/1 for 20mb. If a send 64 byte ethernet frame ( 46 byte-data) what would be the rate effectively one would get.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide