Campus Manager 4.0.6 Discrepancy Report BPDU-Guard disabled on access ports

Unanswered Question
Nov 14th, 2007

Campus Manager Physical Discrepancy is reporting that BPDU-Guard is disabled on access ports when these ports are configured as trunk ports. We have mostly 4506 switches on the network, but all switches are listed in the discrepancy report. The report also contains the same entry for BPDU-Filter. Thanks for any insight.

Exported Report:


Type :BPDU-Guard disabled on access ports

Severity :High

Description :[Switch],Fa2/1,Gi1/1

First found :2007/11/14 12:18:34



Switch has BPDU-Guard global mode disabled

Switch has the following access ports with BPDU-Guard disabled

BPDU-Guard disabled ports:

Port Gi1/1

Port Fa2/1


Switch#show int trunk

Port Mode Encapsulation Status Native vlan

Gi1/1 on 802.1q trunking 9

Fa2/1 on 802.1q trunking 9

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Wed, 11/14/2007 - 12:44

I have been working on a patch for this. If you would like to help me test, please open a TAC services request, and have the engineer contact me.

Note: you will need to upgrade to Campus Manager 4.0.9 first.


This Discussion