11-14-2007 09:00 PM - edited 03-03-2019 07:33 PM
Hai All,
I wud want to set up a MPLS backbone Lab...for this what is the minimum requirement ...how meny routers &...IOS Version ....
Please help me regarding this .. can 1700 series support MPLS if so what is the recomended IOS .. i should use ..
Thanks in Advance..
Lijesh.N.C
11-14-2007 09:41 PM
HI Lijesh, [Pls Rate if HELPS]
CPE ==> 4 Routers
MPLS Cloud:
PE ==> 3 Routers
CPE1 via E-BGP to PE1
CPE2 via E-BGP to PE1
CPE3 via E-BGP to PE2
CPE4 via E-BGP to PE2
Inside MPLS Cloud:
PE1 via MP-IBGP to PE2 (vice-versa)
PE1 to P1 (OSPF Sync)
PE2 to P1 (OSPF Sync)
Neverthless, investing in Physical Routers => You can use Dynamips the Virtual Router Setup.
With this you simulate with CISCO 7206 Router with latest IOS Release.
Do Rate if HELPS
Best Regards,
Guru Prasad R
11-14-2007 10:07 PM
hai Prasad,
Let me try the same i will let you know the status
Thanks for the fast reply
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: