11-15-2007 01:06 AM - edited 03-09-2019 07:23 PM
hi, i got this issue, source coming in via Tunnel needs to be NATed to 1 pool of IPs, this Pool is then allowed in my FW to access VPN. I'm seeing this error,
Incomplete ESP translations:
0 esp_conn=0x646757C0, hanging off nat entry 0x647CB8FC.
Anyone can explain why?
=========================
interface Tunnel1
ip address 1.1.1.1 255.255.255.252
ip nat inside
interface FastEthernet0/0
ip address 2.2.2.2 255.255.255.0
ip nat outside
11-15-2007 07:11 AM
Hi
Do you have NAT Traversal enabled on this router, which version of IOS are you running.
Regards MJ
11-16-2007 09:29 PM
hi MJ,
Nope, NAT-T not enable in the router. IOS:c7200-jk9s-mz.123-22.bin.
11-18-2007 03:50 PM
Hi
I have check the bug tool but could not see any bugs. Have a look at the following link and see if this is any use.
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094ecd.shtml
Regards MJ
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: