Richard Burts Fri, 11/16/2007 - 07:47
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Youssef


One cable will bring up the connection and will pass data. Two cables will allow the data to pass at full rate. So it is enough to have one cable but it is better to have two.


HTH


Rick

Pavel Bykov Fri, 11/16/2007 - 09:03
User Badges:
  • Silver, 250 points or more

In term of marketing bandwidth, you will get 16Gbps with one cable and 32 gbps with complete circuit, i.e. two cables in your case.


If you have E-series, it's 32Gbps with one and 64 with 2.


Hope this helps.

m_zabetian Fri, 11/16/2007 - 09:47
User Badges:

It is work with one cable but two cables you have redundancy and double bandwidth

Actions

This Discussion