cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
443
Views
0
Helpful
3
Replies

Can I use different local AS# for each VRF?

frank
Level 1
Level 1

How can I use different local AS# for each VRF as we are trying to convert a Juniper MPLS network to use Cisco but their current Juniper routers has different local AS# per VRF and don't know if we can do that for IOS?

Example:

router bgp 2

bgp log-neighbor-changes

no auto-summary

!

address-family ipv4 vrf VPN1

neighbor 1.1.1.1 remote-as 3

....

Can't find a command to specify the local AS# under "address-family ipv4 vrf VPN1"?

3 Replies 3

frank
Level 1
Level 1

Never mind... Found the answer and I will use the local-as when peering with the PE routers.

The local-as can only be used for EBGP peering but not IBGP.

Does anyone know how I can do the samething for IBGP peering?

Hello,

I think you can only use eBGP in an address-family.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: