11-16-2007 01:54 PM - edited 03-15-2019 07:17 AM
-CCME 4.1
-Analog trunks
Dial Peer for international dialing
!
dial-peer voice 314 pots
corlist outgoing long-distance
destination-pattern 9T
port 0/3/0
!
If you dial 9 or 9# and wait for the inter digit timeout. If you give you a second dial tone. From there you can dial anywhere.
How do I fix this? Thank you!
In addition, PRI does not have this problem. Only analog trunks
Solved! Go to Solution.
11-16-2007 03:38 PM
No bug.
dial-peer voice 314 pots
destination-pattern 900[1-9]...T
prefix 00
replace 00 with your international access if different.
Hope this helps, please rate post if it does!
11-17-2007 02:04 AM
Yes, but the destination-pattern I suggested, is "better" because it enforces both pattern for country codes (none starts with 0) and a minimum number of digits to follow.
Hope this helps, please rate post if it does!
11-16-2007 03:38 PM
No bug.
dial-peer voice 314 pots
destination-pattern 900[1-9]...T
prefix 00
replace 00 with your international access if different.
Hope this helps, please rate post if it does!
11-16-2007 08:48 PM
From Canada, our international code is 011+
Can I do it like this?..
dial-peer voice 314 pots
destination-pattern 9011T
prefix 011
Thanks Paolo!
11-17-2007 02:04 AM
Yes, but the destination-pattern I suggested, is "better" because it enforces both pattern for country codes (none starts with 0) and a minimum number of digits to follow.
Hope this helps, please rate post if it does!
11-17-2007 01:22 PM
I got you! Thanks again for all your help!
11-17-2007 02:57 PM
Thanks for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: