cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
423
Views
0
Helpful
5
Replies

CCME Bug???

ken.chua
Level 1
Level 1

-CCME 4.1

-Analog trunks

Dial Peer for international dialing

!

dial-peer voice 314 pots

corlist outgoing long-distance

destination-pattern 9T

port 0/3/0

!

If you dial 9 or 9# and wait for the inter digit timeout. If you give you a second dial tone. From there you can dial anywhere.

How do I fix this? Thank you!

In addition, PRI does not have this problem. Only analog trunks

2 Accepted Solutions

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

No bug.

dial-peer voice 314 pots

destination-pattern 900[1-9]...T

prefix 00

replace 00 with your international access if different.

Hope this helps, please rate post if it does!

View solution in original post

Yes, but the destination-pattern I suggested, is "better" because it enforces both pattern for country codes (none starts with 0) and a minimum number of digits to follow.

Hope this helps, please rate post if it does!

View solution in original post

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

No bug.

dial-peer voice 314 pots

destination-pattern 900[1-9]...T

prefix 00

replace 00 with your international access if different.

Hope this helps, please rate post if it does!

From Canada, our international code is 011+

Can I do it like this?..

dial-peer voice 314 pots

destination-pattern 9011T

prefix 011

Thanks Paolo!

Yes, but the destination-pattern I suggested, is "better" because it enforces both pattern for country codes (none starts with 0) and a minimum number of digits to follow.

Hope this helps, please rate post if it does!

I got you! Thanks again for all your help!

Thanks for the nice rating and good luck!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: