11-16-2007 02:51 PM - edited 03-15-2019 07:17 AM
I want to know if the UC 500 can be connected and integrated with a server with Call Manger 5.
11-16-2007 03:45 PM
Yes, absolutely. The UC500 works fine as voice GW and/or SRST for a CM.
Hope this helps, please rate post if it does!
11-16-2007 11:06 PM
?
Q. Does the Cisco Unified Communications 500 Series support Survivable Remote Site Telephony (SRST)?
A. No, the Cisco Unified Communications 500 Series is a new platform designed for small businesses and supports standalone deployments. Cisco offers the integrated services router portfolio for deployments requiring interoperability with Cisco Unified Communications Manager and/or SRST functions. The Cisco Unified Communications 500 Series is meant for distributed voice deployments.
Q. Can the Cisco Unified Communications 500 Series be networked with Cisco Unified CME or Cisco Unified Communications Manager?
A. The Cisco Unified Communications 500 Series can be networked with an integrated services router-based Cisco Unified CME, but the Cisco Unified Communications 500 Series does not work with Cisco Unified Communications Manager.
11-17-2007 12:28 AM
Paolo,
Is there any specific feature set required for SRST/GW support that you stated?
tia
Ajaz
11-17-2007 12:42 AM
The UC520 has it's own feature set (a derivative of adv ip svcs), which does not include SRST.
UC520(config)#telephony-ser
UC520(config-telephony)#srst ?
% Unrecognized command
You can find feature sets that do support it with the feature navigator.
11-17-2007 01:56 AM
Hi,
Thanks cmonks, I stand corrected. I made confusion with the new 1861 that indeed supports SRST:
http://cisco.com/en/US/products/ps5853/products_qanda_item0900aecd806c4def.shtml
With regard to the UC500 however, beside SRTS that is not suppoerted as noted, it should work as H.323 or SIP GW for CM.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: