voice-port 0/0/1no caller-id enable

Unanswered Question
Nov 17th, 2007

Hi

now i dont' reveived and send call's from CCM and cisco 3825

The status of BRI is ok

ISDN BRI0/0/0 interface

dsl 0, interface ISDN Switchtype = basic-net3

L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 0 CCBs = 0

but when a show ccm-manager , at the end you can see:

MGCP Domain Name: MUTILVACISCO3825.grupopanasa.com

Priority Status Host

============================================================

Primary Registered CALLMANAGER01 (192.30.3.246)

First Backup None

Second Backup None

Current active Call Manager: 192.30.3.246

Backhaul/Redundant link port: 2428

Failover Interval: 30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent: 12:07:15 PCTime Nov 17 2007 (elapsed time: 00:00:03)

Last MGCP traffic time: 12:07:15 PCTime Nov 17 2007 (elapsed time: 00:00:03)

Last failover time: None

Last switchback time: None

Switchback mode: Graceful

MGCP Fallback mode: Not Selected

Last MGCP Fallback start time: None

Last MGCP Fallback end time: None

MGCP Download Tones: Disabled

--More-- Backhaul Link info:

Link Protocol: TCP

Remote Port Number: 2428

Remote IP Address: 192.30.3.246

Current Link State: OPEN

Statistics:

Packets recvd: 2989

Recv failures: 0

Packets xmitted: 2726

Xmit failures: 0

BRI Ports being backhauled:

Slot 0, VIC 0, port 1

Slot 0, VIC 0, port 0

Configuration Auto-Download Information

=======================================

Current version-id: {84423BF3-AFC0-4A37-A9C7-781EA4C959F5}

Last config-downloaded:00:00:00

Current state: Waiting for commands

Configuration Download statistics:

Download Attempted : 18

Download Successful : 16

Download Failed : 0

Configuration Attempted : 10

--More-- Configuration Successful : 10

Configuration Failed(Parsing): 0

Configuration Failed(config) : 0

Last config download command: Reset

Configuration Error History:

voice-port 0/0/1no caller-id enable

voice-port 0/0/0no caller-id enable

voice-port 0/1/1no caller-id enable

voice-port 0/1/0no caller-id enable

voice-port 0/1/1no caller-id enable

voice-port 0/1/0no caller-id enable

voice-port 0/0/1no caller-id enable

voice-port 0/0/0no caller-id enable

this voice-port no caller-id is ok??

this is my problme??

help please.

Regards

Alfonso

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Thu, 11/22/2007 - 14:38

Hi, CSCsc00795 is ¨"CCM MGCPbrid device didn't handle CcSelectFacilityReq message properly" so it doesn't seem aplicable.

Why is that you some often point at unrelated bugs for any kind of issue?

allan.thomas Thu, 11/22/2007 - 13:05

ISDN lines support caller-id by default, and you do not appear to have the option to disable it on the voice-port.

This is not specifically a problem, caller-id is an analogue service which when enabled on FXS ports transmit Caller ID, while FXO ports receive Caller ID.

Regards

Allan.

Actions

This Discussion