VPLS and H-VPLS

Unanswered Question
Nov 18th, 2007
User Badges:

Hi


I have ME3750 as uPE and 7600 as nPE. Now I want to extend VPLS from ME3750 to two other ME3750s. The ME3750 is connected to 6724 in 7600.


Can I run H-VPLS between 3750 (extend EoMPLS to nearest nPE)and 7600 and run VPLS directly from 7600. Does 7600 support H-VPLS with 6724 as downlink module. I have ES20 as uplink module on 7600 connected to the core.


Thanks,

Prakash

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
emaamur2006 Sun, 11/18/2007 - 10:48
User Badges:


Hi Prakash


I believe as long as you have sup-720 in the 7600, you can have the solution you described. See config below


3750


Vlan 100

interface fastEthernet x/y

switchport mode dot1q-tunnel ! H-VPLS

switchport access vlan



7600


l2 vfi ip vrf Manual


vpn id 100


neighbor < Other nPe 7600> Encapsulation Mpls


Vlan 100


Interface vlan 100

xconnect Vfi


Maamun





prakashj Sun, 11/18/2007 - 11:30
User Badges:

Thanks Maamun,


But I want to configure H-VPLS using AToM tunnel (EoMPLS) from ME 3750 to 7600..I want to configure ME3750 as L3 node.


Also is there any way to have EoMPLS redundancy on ME3750?


Regards,

Prakash

swaroop.potdar Tue, 11/20/2007 - 20:43
User Badges:
  • Blue, 1500 points or more

Prakash Maamun,


The feature may not be supported on all devices. Do check the support for your to be deployed devices.


HTH-Cheers,

Swaroop

prakashj Wed, 11/21/2007 - 22:05
User Badges:

The ME3750 does not support...so there is no other way to provide EoMPLS redundancy :(

Actions

This Discussion