11-18-2007 07:12 AM - edited 03-05-2019 07:29 PM
I have simple question.... i did trunking ports 4 to 9 at sw-01 and have vlan 8 & 7 at this switch.
does port 5 at vlan 8 ping port 4 at vlan 7 at the same switch ? please at same switch only...
this is my question.
follow the configuration i did :
interface FastEthernet0/4
description Centile Application server
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,7
switchport mode trunk
speed 100
duplex full
spanning-tree portfast trunk
!
interface FastEthernet0/5
description DB Server
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,8
switchport mode trunk
speed 100
duplex full
spanning-tree portfast trunk
11-18-2007 07:33 AM
in addition i have 2 switches and i need to configure port on each one to pass heart beat signaling for fail over my switch type is cisco3560... what commands i should use at the switch.
11-21-2007 10:56 PM
Hi
For inter vlan communication routing need to be done otherwise u can't ping.
regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide