SRST with fractional ISDN CUCMBE 6

Answered Question
Nov 18th, 2007

Hi,


I am carrying out an install with CallManager 6 Business edition and run into a hurdle.

As the customer only has 15 Channels on the ISDN30 E1, I have shut down the channels using the maintenance option in the advance tab of the system parameters; this works fine when the gateway is in MGCP mode. The problem I have is when the gateway falls into SRST mode, as it attempts to put the outbound call out on channel 30 and therefore the call fails. Does anyone know of a fix for this.



Correct Answer by gogasca about 9 years 3 months ago

Use under the ISDN interface the

"isdn b-channel ascending" command

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
vmoopeung Fri, 11/23/2007 - 12:00

MGCP fractional T1 is not fully support in Cisco callmanager , better try changing to H.323 gateway for fractional T1.


Correct Answer
gogasca Sat, 11/24/2007 - 00:55

Use under the ISDN interface the

"isdn b-channel ascending" command

Actions

This Discussion