CCME converting SIP to SCCP

Unanswered Question
Nov 19th, 2007


I have a 2811 router that has CME 4.1 archived on. SCCP phones register fine, but there is a 7960 phone that was previously used as SIP.

How can I convert this SIP phone to SCCP and register with CCME?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Mon, 11/19/2007 - 13:19

For a 7960, just configure an ephone with corresponding mac-address and type and load under telephony service. Make sure you have all the SCCP files correctly configured with "tftp-server". That should be enough to upgrade the phone.

Hope this helps, please rate post if it does!

mrugeshpatel_2 Mon, 12/03/2007 - 09:39

I have tftp configured will all the files, but it is still not picking up the sccp load.

Paolo Bevilacqua Mon, 12/03/2007 - 10:45

Also configure an ephone with correct mac-address and type.

If still no go, collect "debug tftp events" with "term mon".


This Discussion